LiteGear LiteDimmer Plus AC400 DMX, 400W, AC
$1,540.00
Part No: LD-PLUS-AC400-DMX
LiteDimmer Plus AC400 DMX is the ideal companion for powering LiteMat+ Plus and LiteTile+ Plus units up to 400 watts. Its rugged housing includes several mounting options along with four 1/4 -20 threaded inserts for attaching clamps, making it suitable for overhead setups. Locking connections provide AC input and DC output along with DMX pass-through. The unit operates all Plus+CompatibleHybrid fixtures up to 400W. The internal electronics include genuine LiteDimmer hardware known for smooth low-end dimming, flicker-free operation, and rock-solid reliability. Simple manual control is provided through the backlit display along with access to DMX settings.
Specifications:
POWER RATING: 400W
VOLTAGE INPUT: 90~305VAC, 50/60 Hz (C14 Connector)
VOLTAGE OUTPUT: 24VDC Constant Voltage, PWM (PL7 Connector)
DATA PROTOCOL: DMX512
DIMMING RANGE: 0 to 100% Continuous, Flicker-Free
CONTROLS: On-Board ON-OFFSwitch, 5-Pin DMX In and Pass Thru, Local Manual Control
SOFTWARE INTERFACE: Proprietary Connector, Service Center Upgradeable
MOUNTING: (4) 1/4-20 Threaded Inserts, Drywall Screw Holes, Velcro®/Cable Tie Slots, Rubber Feet, Paracord Lanyard
AMBIENT TEMP. OPERATION: -10° to +50° C (14° to 122° F)
IP RATING: IP20
PROTECTION:Over-Current, Over-Voltage, Over-Temperature, Short Circuit., Unit will shut down and recover, automatically after fault condition is removed.
SETTINGS: Smoothing, DMX Bit Rate, Dimmer Response
MODES: Local (HY 1 and HY 2), DMX (HY 1 and HY 2)
CONVENIENCE OUTLET: 12VDC, 3A Max. (2.1 X 5.5 Barrel)
LiteDimmer Plus AC400 DMX is the ideal companion for powering LiteMat+ Plus and LiteTile+ Plus units up to 400 watts. Its rugged housing includes several mounting options along with four 1/4 -20 threaded inserts for attaching clamps, making it suitable for overhead setups. Locking connections provide AC input and DC output along with DMX pass-through. The unit operates all Plus+CompatibleHybrid fixtures up to 400W. The internal electronics include genuine LiteDimmer hardware known for smooth low-end dimming, flicker-free operation, and rock-solid reliability. Simple manual control is provided through the backlit display along with access to DMX settings.
Specifications:
POWER RATING: 400W
VOLTAGE INPUT: 90~305VAC, 50/60 Hz (C14 Connector)
VOLTAGE OUTPUT: 24VDC Constant Voltage, PWM (PL7 Connector)
DATA PROTOCOL: DMX512
DIMMING RANGE: 0 to 100% Continuous, Flicker-Free
CONTROLS: On-Board ON-OFFSwitch, 5-Pin DMX In and Pass Thru, Local Manual Control
SOFTWARE INTERFACE: Proprietary Connector, Service Center Upgradeable
MOUNTING: (4) 1/4-20 Threaded Inserts, Drywall Screw Holes, Velcro®/Cable Tie Slots, Rubber Feet, Paracord Lanyard
AMBIENT TEMP. OPERATION: -10° to +50° C (14° to 122° F)
IP RATING: IP20
PROTECTION:Over-Current, Over-Voltage, Over-Temperature, Short Circuit., Unit will shut down and recover, automatically after fault condition is removed.
SETTINGS: Smoothing, DMX Bit Rate, Dimmer Response
MODES: Local (HY 1 and HY 2), DMX (HY 1 and HY 2)
CONVENIENCE OUTLET: 12VDC, 3A Max. (2.1 X 5.5 Barrel)
Quantity:
Part No: LD-PLUS-AC400-DMX
LiteDimmer Plus AC400 DMX is the ideal companion for powering LiteMat+ Plus and LiteTile+ Plus units up to 400 watts. Its rugged housing includes several mounting options along with four 1/4 -20 threaded inserts for attaching clamps, making it suitable for overhead setups. Locking connections provide AC input and DC output along with DMX pass-through. The unit operates all Plus+CompatibleHybrid fixtures up to 400W. The internal electronics include genuine LiteDimmer hardware known for smooth low-end dimming, flicker-free operation, and rock-solid reliability. Simple manual control is provided through the backlit display along with access to DMX settings.
Specifications:
POWER RATING: 400W
VOLTAGE INPUT: 90~305VAC, 50/60 Hz (C14 Connector)
VOLTAGE OUTPUT: 24VDC Constant Voltage, PWM (PL7 Connector)
DATA PROTOCOL: DMX512
DIMMING RANGE: 0 to 100% Continuous, Flicker-Free
CONTROLS: On-Board ON-OFFSwitch, 5-Pin DMX In and Pass Thru, Local Manual Control
SOFTWARE INTERFACE: Proprietary Connector, Service Center Upgradeable
MOUNTING: (4) 1/4-20 Threaded Inserts, Drywall Screw Holes, Velcro®/Cable Tie Slots, Rubber Feet, Paracord Lanyard
AMBIENT TEMP. OPERATION: -10° to +50° C (14° to 122° F)
IP RATING: IP20
PROTECTION:Over-Current, Over-Voltage, Over-Temperature, Short Circuit., Unit will shut down and recover, automatically after fault condition is removed.
SETTINGS: Smoothing, DMX Bit Rate, Dimmer Response
MODES: Local (HY 1 and HY 2), DMX (HY 1 and HY 2)
CONVENIENCE OUTLET: 12VDC, 3A Max. (2.1 X 5.5 Barrel)
LiteDimmer Plus AC400 DMX is the ideal companion for powering LiteMat+ Plus and LiteTile+ Plus units up to 400 watts. Its rugged housing includes several mounting options along with four 1/4 -20 threaded inserts for attaching clamps, making it suitable for overhead setups. Locking connections provide AC input and DC output along with DMX pass-through. The unit operates all Plus+CompatibleHybrid fixtures up to 400W. The internal electronics include genuine LiteDimmer hardware known for smooth low-end dimming, flicker-free operation, and rock-solid reliability. Simple manual control is provided through the backlit display along with access to DMX settings.
Specifications:
POWER RATING: 400W
VOLTAGE INPUT: 90~305VAC, 50/60 Hz (C14 Connector)
VOLTAGE OUTPUT: 24VDC Constant Voltage, PWM (PL7 Connector)
DATA PROTOCOL: DMX512
DIMMING RANGE: 0 to 100% Continuous, Flicker-Free
CONTROLS: On-Board ON-OFFSwitch, 5-Pin DMX In and Pass Thru, Local Manual Control
SOFTWARE INTERFACE: Proprietary Connector, Service Center Upgradeable
MOUNTING: (4) 1/4-20 Threaded Inserts, Drywall Screw Holes, Velcro®/Cable Tie Slots, Rubber Feet, Paracord Lanyard
AMBIENT TEMP. OPERATION: -10° to +50° C (14° to 122° F)
IP RATING: IP20
PROTECTION:Over-Current, Over-Voltage, Over-Temperature, Short Circuit., Unit will shut down and recover, automatically after fault condition is removed.
SETTINGS: Smoothing, DMX Bit Rate, Dimmer Response
MODES: Local (HY 1 and HY 2), DMX (HY 1 and HY 2)
CONVENIENCE OUTLET: 12VDC, 3A Max. (2.1 X 5.5 Barrel)
Part No: LD-PLUS-AC400-DMX
LiteDimmer Plus AC400 DMX is the ideal companion for powering LiteMat+ Plus and LiteTile+ Plus units up to 400 watts. Its rugged housing includes several mounting options along with four 1/4 -20 threaded inserts for attaching clamps, making it suitable for overhead setups. Locking connections provide AC input and DC output along with DMX pass-through. The unit operates all Plus+CompatibleHybrid fixtures up to 400W. The internal electronics include genuine LiteDimmer hardware known for smooth low-end dimming, flicker-free operation, and rock-solid reliability. Simple manual control is provided through the backlit display along with access to DMX settings.
Specifications:
POWER RATING: 400W
VOLTAGE INPUT: 90~305VAC, 50/60 Hz (C14 Connector)
VOLTAGE OUTPUT: 24VDC Constant Voltage, PWM (PL7 Connector)
DATA PROTOCOL: DMX512
DIMMING RANGE: 0 to 100% Continuous, Flicker-Free
CONTROLS: On-Board ON-OFFSwitch, 5-Pin DMX In and Pass Thru, Local Manual Control
SOFTWARE INTERFACE: Proprietary Connector, Service Center Upgradeable
MOUNTING: (4) 1/4-20 Threaded Inserts, Drywall Screw Holes, Velcro®/Cable Tie Slots, Rubber Feet, Paracord Lanyard
AMBIENT TEMP. OPERATION: -10° to +50° C (14° to 122° F)
IP RATING: IP20
PROTECTION:Over-Current, Over-Voltage, Over-Temperature, Short Circuit., Unit will shut down and recover, automatically after fault condition is removed.
SETTINGS: Smoothing, DMX Bit Rate, Dimmer Response
MODES: Local (HY 1 and HY 2), DMX (HY 1 and HY 2)
CONVENIENCE OUTLET: 12VDC, 3A Max. (2.1 X 5.5 Barrel)
LiteDimmer Plus AC400 DMX is the ideal companion for powering LiteMat+ Plus and LiteTile+ Plus units up to 400 watts. Its rugged housing includes several mounting options along with four 1/4 -20 threaded inserts for attaching clamps, making it suitable for overhead setups. Locking connections provide AC input and DC output along with DMX pass-through. The unit operates all Plus+CompatibleHybrid fixtures up to 400W. The internal electronics include genuine LiteDimmer hardware known for smooth low-end dimming, flicker-free operation, and rock-solid reliability. Simple manual control is provided through the backlit display along with access to DMX settings.
Specifications:
POWER RATING: 400W
VOLTAGE INPUT: 90~305VAC, 50/60 Hz (C14 Connector)
VOLTAGE OUTPUT: 24VDC Constant Voltage, PWM (PL7 Connector)
DATA PROTOCOL: DMX512
DIMMING RANGE: 0 to 100% Continuous, Flicker-Free
CONTROLS: On-Board ON-OFFSwitch, 5-Pin DMX In and Pass Thru, Local Manual Control
SOFTWARE INTERFACE: Proprietary Connector, Service Center Upgradeable
MOUNTING: (4) 1/4-20 Threaded Inserts, Drywall Screw Holes, Velcro®/Cable Tie Slots, Rubber Feet, Paracord Lanyard
AMBIENT TEMP. OPERATION: -10° to +50° C (14° to 122° F)
IP RATING: IP20
PROTECTION:Over-Current, Over-Voltage, Over-Temperature, Short Circuit., Unit will shut down and recover, automatically after fault condition is removed.
SETTINGS: Smoothing, DMX Bit Rate, Dimmer Response
MODES: Local (HY 1 and HY 2), DMX (HY 1 and HY 2)
CONVENIENCE OUTLET: 12VDC, 3A Max. (2.1 X 5.5 Barrel)
